KILN FURNITURE · HIGH-TEMPERATURE INSULATION

Kiln furniture and ceramic fiber insulation, up to 1750 °C

Setter plates, MLCC setter racks and porous setters for makers of electronic and technical ceramics. Ceramic fiber blankets and boards for kiln and furnace builders. Send us the product and size for a price, or your conditions for a recommendation and a sample.

1700 °C
Maximum service temperature of our setter plates (typical value, near-zero load)
approx. 450,000
MLCC setter racks delivered to producers in China (as of October 2026)
approx. 150,000
Zirconia-coated nickel meshes delivered
Sample first
Test in your own kiln before you order
HOW WE WORK

Conditions first. Product second.

The same setter plate can behave very differently in another kiln or under another product. What changes is temperature, atmosphere, load, and how fast you heat and cool. So we do not rush to quote. We ask for your firing conditions and recommend a grade. When the choice is not clear-cut, we send a sample for you to test in your own kiln.

In China and Japan, many customers first came to us to try a single material. Because we know both the materials and the kilns they go into, we could often see that the problem was not only the material. Many of them left with a better setup: a smoother process at a lower cost.

If plates warp, crack or stick in use, send us photos and your firing curve. We will work through the cause with you.

  1. 1
    Tell us your conditions
    Our first reply includes a nine-part process questionnaire.
  2. 2
    We recommend a grade
    Starting from your problem: warping, cracking, scratching or sticking.
  3. 3
    You test a sample in your kiln
    Setter plates and porous setters can both be sampled.
  4. 4
    Order with an inspection report
    Each shipment can include an inspection report. Factory audits are welcome.

Industries

Whether a product fits depends on the firing conditions more than on the industry. These pages start from the conditions each process usually has.

Questions engineers ask us

Short answers here. More questions, grouped by product, are on the FAQ page.

The datasheet says 1700 °C. Why did my plate warp at a lower temperature?
The maximum service temperature describes the material at near-zero load. The heavier the product on the plate, the lower the temperature at which it bends. Tell us both the temperature and the load when you choose a plate.
Why do setter plates crack, and do expansion slots help?
Cracking depends on cooling rate, load, plate size, stacking height and process. Expansion slots relieve stress but cannot guarantee a crack-free plate. Run a small batch before full production.
Can zirconia-coated nickel mesh be used in air?
We advise against it. In air, nickel oxidizes and expands, which pushes the zirconia coating off. Use the mesh in a reducing or inert atmosphere.

Request a quote

Tell us the product, size and quantity. Only your email is required. We usually reply within 1–3 business days.

Need a price? Pick a product and send. That is enough.
Not sure which grade? Tick the recommendation box and tell us your firing conditions.
Want to test first? Tick "Send me a sample".

Email: sales@youka-tech.com

Loading the form…

We use your details only to answer your inquiry. See our Privacy Policy.