High-Temperature Laboratory Box Furnace, 1650 °C

Model SX-18 (1650 °C). In stock, for sintering and heat treatment in the lab and in small batches.

A compact box furnace with a manual door and integrated controls, heated by MoSi₂ elements. The chamber is lined with polycrystalline alumina fiber in several layers, so it heats up quickly and uses less energy.

For high-temperature sintering, metal and glass annealing, quality testing and material analysis in universities, research institutes and company labs.

1650 °C
Maximum service temperature
±5 °C
Temperature uniformity (test conditions below)
In stock
Ships from Shanghai in export packing
220 × 280 × 200 mm
Usable chamber (L × W × H)
10+ years
Units of this model still in daily use

Specifications

ItemSX-18 (1650 °C)
Maximum service temperature1650 °C
Usable chamber (L × W × H)220 × 280 × 200 mm (chamber 250 × 300 × 250 mm)
Outer dimensions (L × W × H)approx. 650 × 750 × 1050 mm
AtmosphereAir
Power supplyStandard: 380 V ±10%, three-phase, 50 Hz ±5%, 9 kW. Other supplies: ask us
Chamber lining / heating elementsPolycrystalline alumina fiber / MoSi₂ elements
ThermocoupleType B
Temperature uniformity±5 °C (200 × 250 × 160 mm zone, empty chamber, 2 h hold at 1500 °C, 9 points)
Heating rateRoom temperature to 1600 °C in 5 h (programmable)
ControlProgrammable controller + SCR
Weightapprox. 260 kg

Features

  • Multi-segment programs, closed-loop control through the whole cycle
  • Gas inlet with flowmeter and solenoid valve; flow adjusted by hand
  • Exhaust vent on the roof to release organics during sintering and protect the chamber
  • Double-wall casing keeps the outer surface cooler

Built to run for years

Units of this model have been in daily use for more than ten years and are still in good condition. The photos below are of furnaces in regular operation.

Before you order

Please check these points. We would rather you know them now than after delivery.

Power supply: the standard unit in stock runs on 380 V three-phase, 50 Hz. If your site has a different supply, contact us and we check whether it can be adapted.
Controller language: the standard controller interface is in Chinese, and we provide an English operating guide. If you need another language, ask us and we check what is possible.
Installation: you install the furnace yourselves. MoSi₂ elements are packed separately; we guide you online.
Service: we cannot send engineers abroad or offer on-site repair. Support is remote: email, video call or messaging apps, as we agree with you.
ORDER AND DELIVERY
  • In stock. Ships from Shanghai in export packing.
  • Orders through our Alibaba.com store.
  • Spare MoSi₂ elements and thermocouples are available.
  • Larger or production furnaces: tell us what you need and we will reply case by case.

Questions about the lab furnace

Can it run on 200 V, 230 V single-phase or 60 Hz?
The unit in stock is 380 V three-phase, 50 Hz. Other supplies may be possible: tell us your voltage, phase and frequency, and we check with you before you order.
Can I use it with nitrogen or hydrogen?
This model is for air. The gas inlet is for small flows, not for a controlled or reducing atmosphere.
What kiln furniture should I use inside?
For most sintering up to 1650 °C, our setter plates fit the chamber. Tell us your samples and we suggest one.
RELATED

Get a quote for the SX-18 lab furnace

Only your email is required. We usually reply within 1–3 business days with price and delivery.

Orders are placed through our Alibaba.com store. Please mention your site's power supply in the message.

Email: sales@youka-tech.com

PRODUCT: LABORATORY BOX FURNACE SX-18, 1650 °C

Loading the form…

We use your details only to answer your inquiry. See our Privacy Policy.