Refractory Bricks: Lightweight and Dense

Bricks for furnace structures and heating-element supports, up to 1750 °C long-term.

Kiln and furnace structures need bricks that withstand high temperature and carry load for years. We supply dense corundum and mullite bricks for the structure, and lightweight high-porosity bricks where the lining also has to insulate.

Lightweight bricks sit between fiber boards and dense bricks: stronger than fiber boards, lighter and more insulating than dense bricks.

1750 °C
Long-term use, dense bricks
1630–1650 °C
Long-term use, LB-80
1.2–1.4 g/cm³
LB-80 bulk density
To drawing
Special shapes and non-standard sizes
DENSE BRICKS

Corundum and mullite bricks

For the structure of high-temperature gas kilns, pusher kilns and other furnaces. Good thermal shock resistance and creep resistance at temperature; long service life. Dense bricks can be used long-term at 1750 °C.

ItemDetail
Standard sizes230 × 114 × 65 mm; 345 × 114 × 65 mm (made before, available again)
Special shapesTo your drawing
Long-term use1750 °C
LIGHTWEIGHT BRICKS

LB-80 hollow bricks for MoSi₂ elements

L-shaped MoSi₂ heating elements need a support that holds them without carrying the heat away. LB-80 bricks are formed so that cavities remain inside after firing, giving good insulation with high strength.

PropertyLB-80 typical value
Al₂O₃79.3%
SiO₂20.3%
Bulk density1.22 g/cm³
Apparent porosity38.2%
Flexural strength10.1 MPa
Long-term use1630–1650 °C

Also in this family

Alumina hollow sphere bricks (AB-95, AB-99) for lightweight high-alumina linings, and high-porosity 99DK alumina products for linings of HTCC and other protective-atmosphere furnaces (long-term 1650 °C).

Typical values (averages), not guaranteed values.

Questions about refractory bricks

Dense or lightweight brick?
Dense bricks carry the structure and load. Lightweight bricks insulate better and weigh less, but carry less load. Many furnaces use both: dense where it bears load, lightweight or fiber where it insulates.
Can you make bricks to our drawing?
Yes. Special shapes and non-standard posts and bricks are made to drawing.
RELATED

Get a quote for refractory bricks

Type, size and quantity are enough for a price. Only your email is required. We usually reply within 1–3 business days.

Send a drawing by email for special shapes.

Email: sales@youka-tech.com

PRODUCT: REFRACTORY BRICKS

Loading the form…

We use your details only to answer your inquiry. See our Privacy Policy.