Alumina Hollow Sphere Bricks
Lightweight high-alumina bricks for linings up to about 1700 °C.
Hollow sphere bricks are made from alumina bubbles bonded together. Industrial alumina is melted in an electric furnace and blown; while liquid, it forms hollow spheres by surface tension, which are then sieved into sizes.
The result is a brick about half as heavy as dense alumina-mullite products (around 1.5 g/cm³ against about 2.85 g/cm³), so a lining stores less heat and the furnace uses less energy.
Two grades
| AB-95 | AB-99 | |
|---|---|---|
| Typical use | Down-draft and shuttle kilns, tungsten-rod, molybdenum-wire and induction furnaces | Hydrogen-atmosphere furnaces |
| Al₂O₃ | 95.5% | 99.6% |
| SiO₂ | 3.7% | 0.2% |
| Bulk density | 1.5 g/cm³ | 1.5 g/cm³ |
| Porosity | 60% | 60% |
| Cold crushing strength | 15.2 MPa | 9.7 MPa |
| Flexural strength | 8.9 MPa | Ask us |
| Thermal conductivity (350 °C) | 1.55 W/m·K | 1.8 W/m·K |
| Reheating shrinkage (1600 °C × 8 h) | 0.1% | 0.1% |
| Max. service temperature | 1700 °C | 1700 °C |
Typical values (averages), not guaranteed values.
AB-95 has higher strength and is also made into heavier hollow sphere products. Standard bricks and special shapes to your drawing.
AB-95 close-up: the hollow alumina spheres are visible on the surface.
Questions about hollow sphere bricks
Get a quote for hollow sphere bricks
Grade, size and quantity are enough for a price. Only your email is required. We usually reply within 1–3 business days.
Send a drawing by email for special shapes.
Email: sales@youka-tech.com