High-Performance Insulation Boards
Nano microporous board for thin insulation layers, and machinable 1300HS board for strong high-temperature parts.
When there is little room for insulation, a nano microporous board does the job of a much thicker layer. When you need a complex high-temperature part with real strength, 1300HS board can be machined to shape without a mold.
AC-1000
Made of silica particles of 7–12 nm with infrared opacifier. The structure forms countless nanoscale pores that suppress conduction, convection and radiation. At 800 °C its thermal conductivity is about a quarter of a standard 1400 ceramic fiber board (0.15 W/m·K), so the same insulation needs a much thinner layer.
| Property | AC-1000 typical value |
|---|---|
| Max. service temperature | 1000 °C |
| Density | 270 kg/m³ (standard) |
| Thermal conductivity | 0.022 (200 °C) / 0.024 (400 °C) / 0.029 (600 °C) / 0.036 (800 °C) W/m·K |
| Shrinkage | ≤2% (1000 °C, 24 h, heated on one side) |
| Composition | SiO₂ 60–80%, SiC 10–30%, others 5–10% |
| Sizes | 1000 × 610 × 12.5 / 25 / 50 mm; tolerance ±5 mm (L, W), ±1 mm (T) |
| Forms | Bare, plastic-film or aluminum-foil wrapped; cut, drilled or grooved to order |
Can be cut and drilled with woodworking tools. Keep away from liquids during installation and use. Non-combustible.
1300HS
Alumina-mullite products are strong but need a mold, which suits large series only. 1300HS gives similar strength and hardness for one-off and complex parts: it can be ground, milled, turned and carved directly. Its surface is smooth and does not dust or shed.
| Property | 1300HS typical value |
|---|---|
| Long-term service temperature | 1200 °C |
| Density | 900 kg/m³ |
| Flexural strength | 10 MPa (about 10 × a standard fiber board) |
| Cold crushing strength | 30 MPa |
| Porosity | 54% |
| Thermal expansion (1000 °C) | 4.0 × 10⁻⁶ /K |
| Thermal conductivity | 0.39 (600 °C) / 0.43 (800 °C) / 0.46 (1000 °C) W/m·K |
| Al₂O₃ / Al₂O₃ + SiO₂ | 42% / 93% |
Also used as setter plates for LTCC debinding and sintering; see Setter Plates.
Typical values (averages), not guaranteed values.
Questions about insulation boards
Get a quote for insulation boards
Product, size and quantity are enough for a price. Only your email is required. We usually reply within 1–3 business days.
Send a drawing by email for machined parts.
Email: sales@youka-tech.com