Vacuum-Formed Shapes, Burner Blocks and Sleeves
Fiber parts made to your drawing, for linings, burners and pipes, 500–1600 °C.
Many furnaces need insulation in shapes that standard boards, blankets and modules cannot give. These parts are vacuum-formed from refractory fibers with a little binder, then heat-treated and machined to your drawing.
Linings and insulating layers for high-temperature equipment, such as muffle furnaces. Chambers are built from interlocking pieces designed to absorb shrinkage, which helps them resist cracking and peeling over long use.
Use temperature: 1000–1600 °C, depending on the fiber.
The burner is the hottest place in a gas furnace, with the sharpest temperature swings. Our burner blocks are made from 1600-grade polycrystalline alumina fiber.
| Item | Detail |
|---|---|
| Density | 230 kg/m³ (dense refractory bricks are usually over 1000 kg/m³) |
| Long-term use | 1400 °C in gas furnaces |
| Expansion joints | Not needed |
| Size | To your drawing |
Good thermal shock resistance; well suited to roof burners. Light structure stores little heat and installs quickly.
Tubular fiber parts fitted over pipes that carry hot gas or liquid.
| Item | Detail |
|---|---|
| Use temperature | 500–1600 °C |
| Typical wall thickness | approx. 60 mm |
| Size | To your drawing |
Typical values (averages), not guaranteed values.
Questions about shaped fiber parts
Get a quote for shaped fiber parts
Product, size and quantity are enough for a price. Only your email is required. We usually reply within 1–3 business days.
Send a drawing by email for shaped parts.
Email: sales@youka-tech.com