Ceramic Fiber Modules
Folded and stacked fiber modules for seamless kiln walls and roofs, up to 1600 °C long-term.
Large kiln walls and roofs need insulation laid over a wide area without gaps. Fiber modules are made for this: blankets are folded or stacked and compressed into standard blocks, then installed on the furnace wall like building blocks.
Stainless steel anchors hold each module to the shell. When the bands are removed, the fiber springs back, the modules press against each other and form one continuous insulating layer. All metal parts sit on the cold side of the lining.
Module types
| 1260 | 1400 | 1500FA / FB | 1600 | 1600S | 1600 veneer block | |
|---|---|---|---|---|---|---|
| Classification temperature | 1260 °C | 1400 °C | 1500 °C | 1600 °C | 1600 °C | 1600 °C |
| Density (kg/m³) | 170 / 192 / 210 | 170 / 192 / 210 | 210 (180) | 130 / 160 / 180 | 130 | 180 |
| Construction | Folded / stacked | Folded / stacked | Composite | Folded / stacked | Stacked (soft board) | Stacked |
| Anchor | H / Z | H / Z | H / Z | H / Z | H | None |
| Long-term use | 900 °C | 1100 °C | 1280 / 1350 °C | 1500–1600 °C | 1600 °C | 1500 °C |
Typical values (averages), not guaranteed values.
1500FA and 1500FB
A 1400 module inside, faced with 1600-grade blanket outside: high-temperature performance at a reasonable cost, and a hot face that does not shed onto your products.
- 1500FA: wrapped in 1600-grade blanket. Long-term 1280 °C, max. 1320 °C. Easy to install.
- 1500FB: 1600-grade blanket keyed onto the face, over 100 mm thick if needed. Long-term 1350 °C, max. 1400 °C.
Where they are used
- Petrochemical: heaters, reformers, cracking furnaces
- Steel: ladle covers, reheating and annealing furnaces
- Ceramics: tunnel kilns for tableware, sanitaryware and bricks
Light, low thermal conductivity, fast heating; no gaps after installation.
Questions about fiber modules
Get a quote for fiber modules
Product, size and quantity are enough for a price. Only your email is required. We usually reply within 1–3 business days.
Send a drawing by email for shaped parts.
Email: sales@youka-tech.com