Alumina Setters for ITO Target Sintering

High-purity setters between the target and the base plate, so nothing contaminates the target.

ITO targets demand very high purity. The setter that touches the target during sintering must not bring in any contamination. Our ITO setters are used by most ITO target producers in China.

Our ITO setters are high-purity alumina, grade SMS-99: 99.5% Al₂O₃ with only 0.01% Fe₂O₃. They sit between the ITO target and the setter plate below, and keep the target clean. Both faces are ground for flatness.

99.5% Al₂O₃
Grade SMS-99 (typical)
0.01% Fe₂O₃
Very low iron (typical)
Ground
Both faces ground for flatness
Most
ITO target producers in China use our setters
IN CONTACT WITH THE TARGET

ITO setter discs and squares (SMS-99)

  • Round discs, placed directly under the target; square plates on request
  • High-purity alumina to protect target purity
  • Both faces ground, so flatness is controlled
  • Used on a large setter plate below, which keeps the stack level
PropertySMS-99 typical value
Al₂O₃99.5%
SiO₂0.07%
Fe₂O₃0.01%
Bulk density3.1 g/cm³
Apparent porosity12.2%
Flexural strength40 MPa
Thickness after grinding9.9 ± 0.1 mm (10 mm disc)
Max. service temperature1600 °C

Typical values (averages), not guaranteed values.

Standard disc: Ø35 × 10 mm. Square plates and other sizes to your drawing.
BASE BELOW

Large setter plates

Large targets need large plates that do not deform. Our large setter plates have high flexural and bending strength at temperature, good flatness, and can be reused cycle after cycle. Grade and size are made to your requirements; plates up to 1000 × 500 mm have been made.

See grades on the Setter Plates page

Questions about ITO setters

Why use a separate setter under the target?
The setter plate below is chosen for strength and flatness at large size. The high-purity setter on top is chosen for purity, because it is the part that touches the target.
Can you make setters to our target size?
Yes. Our standard disc is Ø35 × 10 mm; square plates and other sizes are made to your drawing, with both faces ground. The large setter plate below is also made to your requirements.
RELATED

Get a quote for ITO setters

Shape, size and quantity are enough for a price. Only your email is required. We usually reply within 1–3 business days.

You can also send a drawing by email after submitting the form.

Email: sales@youka-tech.com

PRODUCT: ALUMINA SETTERS FOR ITO

Loading the form…

We use your details only to answer your inquiry. See our Privacy Policy.