Alumina Ceramic Parts
95% and 99% alumina parts to your drawing: forming, sintering and precision machining in one supply chain, tolerances down to ±0.05 mm.
Besides kiln furniture, we supply technical ceramic parts in 95% and 99% alumina, made in many shapes to your drawing: plates, rods, crucibles, boxes and fixtures.
Typical uses include metal injection molding (MIM) and semiconductor equipment.
From powder to finished part, in one place
Many alumina parts are formed and fired by one company, then sent to another for precision machining. Our supply chain for alumina parts covers all three steps in one place, so you have one contact, fewer hand-offs, and quality that stays consistent from batch to batch.
95% alumina (ZL-95MD)
| Property | Typical value |
|---|---|
| Al₂O₃ | approx. 94.6% |
| SiO₂ | approx. 2.1% |
| Fe₂O₃ | ≤0.1% |
| Bulk density | 3.71 g/cm³ |
| Apparent porosity | ≤0.1% |
| Surface hardness | approx. HV 1160 |
| Max. service temperature | 1450 °C |
Typical values (averages), not guaranteed values.
Data for 99% alumina on request. Send us your drawing and we confirm what tolerance is possible for your part.
What to send for a quote
- Drawing with dimensions and tolerances (PDF is fine)
- Material: 95% or 99% alumina, or ask us
- Quantity and use temperature
Get a quote for alumina parts
Product, size and quantity are enough for a price. Only your email is required. We usually reply within 1–3 business days.
Send a drawing by email for shaped parts.
Email: sales@youka-tech.com